EPS foam is a thermoplastic material, after subsequent heating foam, per cubic meter volume contains 300--00 million independent sealed bubble, the volume of air containing 98% or more, such a structure to give it a lot of features. Because of the density can be as low 10-30kg / m3, therefore EPS is currently the lightest packaging materials, at higher load, this material will be bent, when subjected to shock or falling to the ground, he will play a buffer , shock effect; at the same time, due to the small thermal conductivity properties and because air is enclosed in foam and not convection, so the EPS is a very superior insulation performance materials. Widely used in refrigerators, freezers, cold storage and other civil buildings also use it for thermal insulation materials. 1. The main structure of the building to protect and prolong the life of the building. Since the outer insulation is placed outside the insulation layer structure, reducing the stress caused by the temperature change due to structural deformation and reduce harmful substances in the air and ultraviolet radiation on the structure of erosion. 2. Effectively eliminate the "thermal bridge" previously used in the insulation, "thermal bridge" is difficult to avoid, and wall insulation to effectively prevent the generation of thermal bridges, to avoid condensation. 3. Make the wall temperature tide situation improved, the general need to set up within the insulation vapor barrier, and the use of external insulation performance of insulation materials through temperature is much stronger than the main structure, generally does not occur condensation inside the wall, structural layer The entire wall temperature has increased further enhanced thermal performance of the wall. 4. conducive to stable at room temperature, using exterior insulation, heat storage capacity due to the larger wall structure layer on the inside of the wall, help maintain a stable temperature 抲. 5. Increase the use of housing area. Avoid secondary damage to the insulation decoration. 1. The company's main foam (Styrofoam): foam sheet, shaped foam, molded foam, foam tablets; 2 EPE (EPE):. EPE sheet, shaped EPE, EPE EPE tube coil and pearl bar; 3 bubble film (bubble paper): bubble film membrane, the membrane material bubble, bubble bags. Customers are welcome to inquire! For more details, please pay attention to the foam board Shenzhen Wenjuan process Packing Co., Ltd. website!